|
Product Details:
Contact Now
Chat Now
|
| Cable Diameter Range: | 1.0-2.0 Mm | Tested Working Load: | 40 Kg Per Point |
|---|---|---|---|
| Exit Type: | Bottom Exit | Body Diameter: | 13 Mm |
| Overall Height: | 28 Mm | Net Weight: | 18 G |
| Finish Options: | White / Black / Bright Chrome | Colour Options: | White, Black, Bright Chrome |
| Locking Method: | Spring Loaded Self-locking Jaws | Installation Tools: | None Required |
| Application: | Recessed Downlights, Ceiling Spotlights | ||
| Highlight: | Self-Locking Cable Gripper 1.0-2.0mm,White Flat Base Cable Gripper,Recessed Downlight Suspension Gripper |
||
This iron body suspension cable gripper is designed for commercial lighting installers who need fast, repeatable and safe ceiling drops. With a gripping range of 1.0-2.0 mm and a tested working load of 40 kg per point, the model removes the need for knots, ferrules and set screws, and it can be re-adjusted on site at any time without tools.
Press the top plunger and the cable slides freely through the gripper body; release and the spring-loaded jaw set locks the cable instantly. No pliers, no spanners and no cutting on the ladder. Electricians can fine-tune the drop height one-handed after the fixture is already hanging, which shortens installation time on every suspension point and makes late layout changes painless.
Inside the body, the serrated jaws are spring loaded and self-energising: the higher the load, the tighter the grip. Clamping force is evenly distributed across the full jaw contact area, so the wire rope does not slip, ovalise or mark. Every production batch is pull tested to 40 kg per point, keeping suspended fixtures stable for the full service life of a commercial installation.
The body is made from Zinc alloy body with compact cylindrical shell, available in White / black / bright chrome. Surface treatment options let the gripper blend into the fixture design instead of interrupting it, while the plated and painted finishes resist fingerprints, humidity and the light abrasion typical of on-site handling. Available colours: White, black, bright chrome.
The gripper accepts 1.0-2.0 mm steel wire rope, including galvanised, stainless and PVC-coated cable. It can be paired with ceiling bases, eyelets, hooks, ceiling attachment plates and pre-cut wire rope slings to form a complete lighting suspension kit, so one supplier covers the whole drop from ceiling anchor to fixture.
The 13 mm cylindrical body and flat seating base keep the fitting visually quiet once installed. There are no protruding screws or sharp edges, which suits exposed ceilings where the hardware stays visible: downlights, panel lights, linear systems, pendant lights and acoustic panel suspension.
Pull load test reports and material certificates can be supplied with each order, and the product is built to meet the documentation expectations of EU and North American commercial lighting projects. This is the part of the purchase that distributors and specifiers ask for most often, and it is available on request with the model number quoted on the report.
| Item | Specification |
|---|---|
| Model | SCG-C12W |
| Body material | Zinc alloy body with compact cylindrical shell |
| Cable diameter range | 1.0-2.0 mm |
| Tested working load | 40 kg per point |
| Exit type | Bottom exit |
| Body diameter | 13 mm |
| Overall height | 28 mm |
| Net weight | 18 g |
| Finish options | White / black / bright chrome |
| Locking method | Spring loaded self-locking jaws, press to release |
| Installation tools | None required |
Standard packing is a poly bag plus export carton, with project-based labelling and pre-cut cable lengths available on request. Custom body colours, laser marking, private label cartons and mixed kits can be produced for distributor programmes. Samples are available for on-site trials before the main order is released.
Contact Person: Mrs. Jenny Liu
Tel: +86 15307696798