|
Product Details:
Contact Now
Chat Now
|
| Model: | YY-TL51P | Overall Length: | 51mm (2 Inch) |
|---|---|---|---|
| Flange Head Diameter: | 14mm (0.55 Inch) | Tapered Tip Section: | 15mm (0.59 Inch) |
| Wire Hole Diameter: | 2mm (0.078 Inch) | Body Structure: | Helical Ribs With 4 Expansion Slots |
| Material: | Carbon Steel, Zinc Plated | Zinc Coating: | 8-12 Micron, 48h Salt Spray |
| Board Thickness: | 9.5-12.5mm Plasterboard | Reference Working Load: | 5kg Per Fixing In 12.5mm Board |
| Installation: | Tapered Tip Driven Up Into The Board, Flange Flush At The Underside, Wire Through The Head Hole | Application: | Hotel Pendant Lamps, Light Boxes, Signage, Display Hanging |
| Cable Type: | 1.5-2.0mm Aircraft Cable, Galvanised Or Stainless | System: | Wire Cable Hanging System, Height Adjustable On Site |
| Highlight: | wire cable hanging system,adjustable aircraft cable fittings,tapered ceiling wire anchor |
||
A 51mm steel anchor from our wire cable hanging system range, with the 15mm tapered tip driven up into the plasterboard, the ribbed body held in the gypsum core and the Ø14mm flange sitting flush against the board underside. The suspension wire passes through the Ø2mm head hole and locks with three twists. Built for pendant lights, display signage and light services where the ceiling is already finished and no batten, bracket or plastic plug is available.
![]()
| Point | Plastic plug and screw hook | YuYang twist-lock wire anchor |
|---|---|---|
| Parts per fixing point | Plug, screw hook and wire clip | One anchor, wire goes straight through the head hole |
| Fixing time | Drill, insert plug, drive hook, crimp | Drive and twist, about 8 seconds |
| Ceiling line | Hook and plug collar protrude below the board | Only a flush flange and the wire show |
| Board damage | Plug can spin and crumble the core | Ribs cut a clean thread, four slots splay |
| Overall length | 51mm (2 inch) |
| Tapered tip | 15mm (0.59 inch) section, driven up into the board first |
| Head and flange | Ø14mm (0.55 inch), flush at the board underside |
| Wire hole | Ø2mm (0.078 inch) through the head, for 1.5–2.0mm wire |
| Body | Helical ribs, four longitudinal expansion slots |
| Board thickness | 9.5mm, 12mm and 12.5mm plasterboard |
![]()
Flange head, drive slot and rib profile in close-up.
Tip up, flange down. The tapered point and the ribbed body are driven up through the board and stay held by the core, hidden above the ceiling face, while the flange seats flush at the underside and the wire leaves through the head hole. Anchors are spaced 300–600mm apart and kept at least 50mm away from board joints.
![]()
Four-point set-out: tip and ribs in the board, flange flush at the face, wire straight down.
Single point hangs for glass pendants in hotel rooms, restaurant bars and reception areas: the tapered end is driven into the board, the wire drops straight down and the height is set by the twist, so the pendant hangs close to the ceiling line.
![]()
Thread the wire through the head hole, twist three full turns minimum, then cut the tail 15mm from the head. No crimp sleeve, no separate clip, and the height can be re-set by twisting again.
| MOQ | 1000 pcs, mixed sizes allowed |
| Packing | 100 / 500 / 1000 pcs per bag, carton with desiccant |
| OEM | Printed bag, head marking, colour plating from 50,000 pcs |
| Lead time | 3–5 days stock, 15–20 days production |
Which end goes into the board? The tapered tip, driven up first. The flange stays flush at the board underside and the wire leaves through the head hole.
What wire should I pair with it? 1.5mm or 2.0mm galvanised steel wire for indoor ceilings; stainless wire for coastal or humid sites.
Will it hold a 3kg pendant? One anchor in sound 12.5mm board is rated for about 5kg working load with a factor of three; heavier fixtures use two or four points.
Can the anchor be colour matched? Yes, yellow zinc, black oxide and painted heads are produced to order.
YuYang – ceiling wire anchors and suspension cable grippers, produced to drawing.
Tell us your board thickness, wire size and fixture weight, and we will confirm the anchor and packing within one working day.
Contact Person: Mrs. Jenny Liu
Tel: +86 15307696798